Random good picture Not show

91. Pullulanase is used to cleave the branching point of amylopectin for preparing starch film and raising its tensile strength.

92. Michel : Ever hear of tensile strength? Hooke's Law of Elasticity?

93. Palmitic acid seemed to decrease the elongation percentage, although no conclusive results were found on tensile strength.

94. The paper introduces the formula, process and tensile strength of the organic-inorganic composite adhesive which is prepared by mixing acetalization of polyvinyl alcohol with silicasol.

95. Some characteristics of the rolls, such as strength vs. Thermal shock, tensile strength and contact fatigue strength, influence spalling. Thus, strength was investigated as a hardness parameter.

96. The tensile strength increase too , while the rupture elongation decreased slightly.

97. For testing the tensile strength and flexure strength of wire.

98. RESULTS Tableting strength, humidity in granules and granule strength were the leading factors which affect tensile strength, fragility, dissolution percentage of tablets.

99. The paper is made by the dividable composite fibers(DCF) and ES fibers, the proportioning of the two kinds of fibers effects the absorption and tensile strength of the paper distinctly.

100. Wettability, tensile strength, interdiffusion and metallurgy combination between base metal and filler metals of amorphous filler metal are better than as-cast one.

101. The indicators of our products ( including Water resistance, flatness, tensile strength, glossiness ) reach the world advanced level.

102. Properties determined by mechanical testing, such as yield strength, ductility, ultimate tensile strength, hardness, bendability, impact strength, etc.

103. The tensile strength, modulus of elasticity(MOE) and hardness of Pinus massoniana fibers were determined by using zero-span tension and nanoindentation technique.

104. In this case, "cohesive strength" and "tensile strength" are not exactly identical in concept.

105. Then, the physical properties of periodate oxycellulose fibers were measured. These properties include dry tensile strength index, rewet tensile strength index, elongation, etc.

106. Factors influencing the tensile strength of polymerizer head sample were introduced, which included the sampling position, sampling direction, sampling quantity and the cross section shape of sample.

107. AIM: To observe the effect of binding on the mechanical characteristics of bursting pressure and tensile strength after laser vascular anastomosis with binding.

108. The ultimate tensile strength and elongation of extrusion bar after forging process was much higher than that of the direct extrusion bar.

109. Tensile strength decreased, while the tensile break extension percentage increased first and then decreased, flexural properties was not sensible to the changing humiture.

110. The results showed that in the case of lithium ionomer, addition of zinc stearate lowered obviously the melt viscosity,[http://sentencedict.com/tensile strength.html] and enhanced tensile strength of the ionomer.

111. The results showed that the tensile strength and elastomeric character of ionomers increased with the increasing of valence number of ions.

112. With the increase of notch root radius and the decrease of stress concentration coefficient, the tensile strength decreased.

113. It was found that tensile strength, pendulum hardness of the latex film cast from hybrid emulsion increased and water resistance became better with increasing the content of MMA.

114. The results showed that about 11% (weight fabrication) chopped fiber or 37% glass cloth reinforcing PTFE had the highest tensile strength and acceptable dielectric properties. Crystallizing phenome...

115. Polyamidoamine ( PAMAM) G4. 0 dendrimer was used as additives to nylon 6. The influence of different quantity of PAMAM on the tensile strength, impact property and MFR of nylon 6 were investigated.

116. The yield and tensile strength of the welded joints of the two kinds of materials increase under dynamic loading and prestrain condition that have little effect on the plasticity of structural steel.

117. On the premise that the tensile strength and the end quenching hardness don ′t decrease too much, the impact value can be greatly increased by increasing chromium content in composition range.

118. Tensile strength and hardness of caoutchouc modified by cenosphere were studied in order to explore cenosphere composite materials and improve some properties of composite materials.

119. In comparison to other leathers, deerskin offers comparatively high tensile strength.

120. Either power or exponential relations were fitted between root tensile strength and root diameter, and the root tensile strength decreased with increasing diameter.